Wendougee LITA Espresso Machine With Pressure Profiling & Flow Control

To set up your Wendougee LITA series for the first time, follow these steps to make sure both boilers are filled up before you switch on the heating elements:

1. Fill the water reservoir completely.
2. Turn on the machine. The pump will start automatically and begin filling the steam boiler.
3. Once the steam boiler is full, check the water reservoir and refill it if needed.
4. Press the brew button or use the M button on the group head to start filling the brew boiler.
5. After a short time, water will begin flowing from the group head. When you see a steady flow with good pressure, both boilers are fully filled.
6. You can now safely activate the heating elements through the tablet interface.

Important

To keep your Wendouge LITA series espresso machine working well, always use filtered water. Hard water can cause limescale to build up inside the boilers and hydraulic system. This is one of the most common causes of performance issues and costly repairs. Using water that has been filtered correctly will protect your machine, keep it working well, and make it last longer.

Yes. Vellutto ships the Wendougee LITA series across the EU, EEA and Switzerland with insured courier companies. we will ship your machine within 1–2 working days, and it should take between 2 and 7 working days to reach you, depending on where you are.

Both machines come from Wendougee's prosumer range, but they're aimed at pretty different users.

The DATA S is the serious one. Dual boiler, gear pump, and full pressure and flow profiling through the Wendougee E-bar app. The 1.8L steam boiler handles milk steaming without breaking a sweat — useful if you're pulling back-to-back drinks or working with larger jugs. The gear pump matters too: profiling curves come out smoother and more repeatable than anything a vibration pump can do, so if you're dialling in specific extraction shapes, this is the one. You can also plumb it straight into a filtered water line, which means no tank to refill.

The LITA series is smaller, lighter, and more affordable. It uses dual vibration pumps and a 0.8L steam boiler — fine for one or two drinks at a time, but it'll run out of steam faster and isn't as thermally stable under load. What it does have that the DATA S doesn't: an onboard display and a control disc right on the group head, so you can tweak settings without pulling out your phone. It's also much kinder to a small kitchen counter.

Pick the DATA S for steam power, gear-pump profiling precision, and direct water plumbing. Pick the LITA if budget, footprint, or built-in on-machine controls matter more than raw capability.

also check our blog: Wendougee DATA S or LITA BA: Which Profiling Espresso Machine To Buy?

The Lita Espresso Machine Series combines professional-grade build quality with a compact, home-friendly design. Featuring a sturdy frame, premium components, and a refined finish, it delivers the feel and performance of a professional machine—enhanced by Wendougee’s continually evolving companion app.

No—the Lita does not offer dynamic temperature profiling like the Decent DE1. Instead, its dual-boiler system and saturated group head provide highly stable, consistent brewing temperatures, while allowing you to extract espresso and steam milk simultaneously.

Yes. The Lita features dedicated brew and steam boilers, each with independent temperature control. The steam-boiler setting determines the power available at the steam wand, and the dual-boiler design lets you brew espresso and steam milk simultaneously.

Yes, the Lita Series uses PID temperature control to maintain precise, stable brewing temperatures.

Yes, the Lita Series features a no-burn (cool to touch) steam wand, allowing you to position it comfortably while steaming without burning your hands.

No — the LITA series works with any grinder. That said, pairing it with a Wendougee grinder unlocks extra features through the E-bar app:

• Wendougee MILO II or MILO Play: you can save a grind size to each profile and recall it with a single tap in the E-bar app, so switching between beans or profiles doesn't mean re-dialling from scratch.
• Wendougee ARES: goes one step further and syncs the grind size automatically when you change profiles. It cuts dial-in time significantly, which is mostly a win in commercial settings where you're switching beans throughout the day.

Yes. The Lita series does not require training to operate. The physical controls are labeled and behave as expected. Saved brew profiles run without any app connection select a profile, pull the shot. For users who want more control, the E-bar app exposes pressure curves, pre-infusion settings, and flow rate adjustment. Those features are there when you want them. They are not required to make good espresso.

The Lita uses a standard 58 mm portafilter and comes with a bottomless portafilter—rather than a double-spout version—along with filter baskets, a blind basket, tamper, milk pitcher, and shot glass.

The Lita uses a removable 1.2 litre water tank with a float sensor to monitor the water level. It cannot currently be connected directly to the mains water supply—this option is available only on the Data S. The upcoming Lita Sigma, expected in 2027 as it will feature a gear pump that allow direct plumbing.

The machine uses PID (Proportional-Integral-Derivative) temperature control on the brew boiler. PID continuously measures boiler temperature and adjusts heating to hold it at a set target, rather than cycling on and off around a threshold. The result is shot-to-shot temperature consistency. Target temperature is configured in the E-bar app.

the Wendougee MILO play is great choice it also work with the machine and inside the E-bar ecosystem. however you can choose any grinder that can grind for espresso.

Max flow rate is the upper limit on how much water the group can push through the puck per second. On the LITA series it's set by a needle valve under a small access hole on top of the machine. Open the valve with a flat-head screwdriver to raise the limit, close it to drop it. Factory setting is 12 ml per second, which suits most workflows.

Two silence electromagnetic Pumps (vibratory pumps) working in a different frequencies, Two pumps allow pressure and flow profiling and deliver smooth water flow to protect the puck.

• 58mm bottomless portafilter with wooden handle
• baskets
• Backflushing disc
• Shower screen brush
• Tablet / iPhone stand (handy for the E-bar app while you're dialling in)
• Tamper
• a milk jug
• a removable tablet stand

The tank holds 1.2 litres. It has a built-in sensor so you know when you need to refill.

To refill: it can be refilled from the front under the drip tray.

Yes, by taking the shot parameters off a Decent DE1, a Slayer, a La Marzocco, a Profitec Pro 800, or even a lever machine, and build the equivalent curve in the E-bar app, and run it on the Wendougee LITA series.

Width: 26.1 cm. Depth: 38.6 cm. Height: 33.4 cm. Weight: 22 kg. The depth figure is the one to check before purchase 38.6 cm on a 60 cm worktop leaves a workable footprint, but less clearance than it sounds if a backsplash or shelving sits close behind. The weight makes this a stationary machine. Pick a spot.

Both machines handle pressure profiling and flow control, but they get there through completely different engineering.

The LITA is built around traditional boilers with accurate temperature probes, so thermal stability comes from sheer thermal mass. It runs a dual silent vibratory pumps, which is quieter and than the normal vibratory pumps most machines use. And because it's a true dual boiler, you can pull a shot and steam milk at the same time.

The Decent DE1 uses thermoblock technology instead — water is heated rapidly on demand, right before it hits the group head. It runs two vibration pumps, one for cold water and one for hot. You can't brew and steam simultaneously on a DE1. What the Decent does give you that the LITA doesn't: temperature profiling through the shot, adjusting the brew temperature mid-pull.

So it comes down to what you care about: dual-boiler thermal feel, simultaneous brew and steam, and a dual vibratory pumps point toward the LITA. Mid-shot temperature control points toward the Decent.

Flow profiling controls the amount of water per second rather than the pressure. As the coffee puck changes resistance during extraction, the pressure will rise and fall to maintain a constant flow rate. This can lead to more even extractions. In flow mode, the pump adjusts its speed to maintain the set flow rate. The principle is similar to what the Decent DE1+ does.

Honestly, it depends on the coffee and what you're chasing in the cup.

Pressure profiling is the intuitive choice if you've used a lever machine — you think in pressure phases, and that's what the curves look like. Flow profiling is often easier to dial in, because the pump quietly corrects for small grind inconsistencies that would otherwise throw off a pressure-based shot.

The coffee boiler is ready in about 3.5 minutes, and the steam boiler reaches temperature in around 4.5 minutes. For the best flavour and full thermal stability from the saturated group head, let the machine warm up completely for 10–15 minutes.

Yes. The Wendougee E-bar app includes a Community tab where users upload and download profiles, so beginners can pull up recipes from experienced baristas instead of dialling everything in from zero.

One thing to be realistic about: downloading a profile won't give you someone else's exact shot. Grinder, beans, water, and ambient conditions all push the result around, so a shared profile is a head start you'll still need to tweak the grind and probably adjust a few parameters to make it sing on your setup.

Yes. The LITA Series pairs with an external scale like BooKoo scale over Bluetooth and cuts the shot automatically when it reaches your target weight no watching the scale and reaching for the paddle.

Supported scales right now:

• BooKoo
• Acaia
• DiFulid

Yes. The Wendougee E-bar app gets regular updates that add new features, and machine firmware is flashed through the same app you don't need cables or a service visit.

Follow the manufacturer's instructions when an update runs. Don't unplug the machine or close the app partway through, or you risk bricking the firmware.

Most of the LITA Series features map directly to specific frustrations home baristas run into. Here's how it handles them:

Inconsistent shots. The gear pump holds pressure steadily with real-time feedback, so shot-to-shot variation drops and your profiles actually become reproducible instead of lucky.

Not enough control over extraction. Choose pressure profiling or flow profiling, adjust the pump in fine increments, and build whatever curve you want pre-infusion ramps, pressure plateaus, declining tails. Every profile saves in the E-bar app and recalls with a tap.

The learning curve on manual machines. The E-bar app shows live pressure, flow, and temperature graphs while you pull, and lets you save what worked. Pair it with the MILO II grinder and Themis scale and you get a guided dial-in workflow that walks you through the process step by step.

Temperature swings. Two independent stainless-steel boilers, each with its own PID controller, handle brew and steam separately. Stability is on par with commercial machines.

Slow warm-up. About five minutes from cold to brew-ready — faster than most E61 machines in this category.

Loud, uneven pumps. The gear pump is much quieter than a vibration pump and gives smoother pressure transitions. In sound and feel, it's closer to a rotary.

Grinder and scale integration that doesn't really exist on most machines. Paired with the MILO II and the Themis, grind size syncs to each profile and the shot stops automatically at your target weight.

No way to learn from other baristas. The E-bar app has a community feed for uploading and downloading extraction curves. Starting from a proven profile is a lot friendlier than building from zero.

Cleaning. Programmable cleaning cycles, a three-way valve that makes backflushing simple, and a front-access drain on the steam boiler for routine maintenance.

What the LITA unlocks beyond fixing those problems:

• Room to experiment with profiles you can't build on a manual machine
• Actually getting what you paid for out of expensive beans
• Pulling extreme light roasts — the high-acidity Scandinavian-style coffees that most home machines struggle with

No, for the most part after a one-time setup with the free E-Bar app on any Android or iOS phone/tablet, the LITA Series runs standalone. Saved profiles load onto the Intelligent Disc and launch from there. Many owners report using the app only occasionally to dial in a new coffee.

The Intelligent Disc is the circular capacitive touch controller above the group, combined with a small display. It lets you scroll and launch any saved pressure or flow profile, adjust temperature on the fly, and read real-time pressure, flow and shot-time without opening the app.

Yes, but one at a time per profile. Each profile is either pressure-priority (you programe the bar curve and flow adapts) or flow-priority (you programe the ml/s curve and pressure adapts), with a needle valve capping maximum flow at 12 ml/s. You only can mix them when you design a profile.

Wendougee's own MILO Play, MILO II and Ares grinders pair through the E-Bar app, and BOOKOO's Themis Mini and Themis Ultra scales and Acaia scales, DiFluid scales pair for stop-by-weight shots. Third-party grinders work perfectly as dumb grinders; only the E-Bar ecosystem talks to the app.

Pair the Themis to the E-Bar app over Bluetooth, set a target yield (say 36 g) in the profile, it automatically tare the scale with the empty cup, then push the brew button. The machine cuts the pump automatically when the scale reports target weight.

The E-Bar app supports recipe download and saving of pre-configured flavour curves, based on the Grokipedia/app-store documentation of the Wendougee platform. Cross-user sharing works via profile files. The community is smaller than Decent's Diaspora, so profile libraries are still improving.

Electromagnetic vibratory pumps are quieter than a classic Ulka but noisier than the DATA S gear pump.

The Bianca V3 is a classic E61 dual-boiler with a mechanical paddle that varies flow analogue-style; the LITA Series is app-programmable pressure and flow with Bluetooth scale and grinder integration.

which should you buy? The Decent profiles pressure, flow AND temperature and has the strongest community (Diaspora). The LITA Series profiles pressure and flow only, but gives you a traditional dual-boiler architecture, a saturated 316L-stainless group and real steam power from a 0.8 L boiler, steaming the Decent cannot match without the add-on. the LITA is more premium as built quality however, the decent still give you better control specially temperature profiling.

Linea Mini uses a saturated group, paddle pre-infusion and commercial pedigree, at roughly double the LITA Series price. the Micra vs LITA direct shortlist. The LITA Series matches Micra on saturated group and dual-boiler architecture and adds programmable profiles the Micra lacks; the Micra wins on bump (rotary pump) and brand prestige.

The four-variant ladder decodes as: BR = 1 pump, pressure control, no hot water tap (entry). LR = 1 pump + hot water tap. BA = 2 pumps, adds flow-priority mode (this is the Vellutto version). LA = 2 pumps + flow-priority + hot water tap. All four share the dual-boiler, saturated-group, app-controlled platform. Currently BR and BA are the mainstream models in market.

No. The Wendougee-branded Android tablet is a paid accessory; the machine is designed to be driven from any Android or iOS phone or tablet you already own, using the free E-Bar app. Setup requires a phone or tablet once; day-to-day operation can be done entirely from the Intelligent Disc and paddle.

Daily: flush the group for 2–3 seconds and wipe the steam wand. Weekly: backflush with a blind basket and espresso-safe detergent (e.g., Cafiza). Every 3–6 months: descale the brew and steam boilers with a citric-acid or manufacturer approved descaler. Interval depends on water hardness — soft-water users at <50 ppm can stretch to 6 months.

Yes, spare parts are available

Firmware updates are pushed through the E-Bar app over Bluetooth. When you open the app with the machine connected, it checks Wendougee's servers and prompts you to install any available update on the controller and connected peripherals.

we usually ship the same day or next day, and usually delivered with in few days